Skip to content

TECHNICAL DOCUMENT

LED display datasheets & technical references

Find LED lamp, driver IC, controller and power supply documents. Check the exact model and revision against the component on your repair bench.

AllLED Lamp BeadsPower SuppliesDriver ChipsController
MCTRL4K LED Display Controller User Manual V1.1.1
www.ledfixlab.com
Controller
PDF Resource

MCTRL4K LED Display Controller User Manual V1.1.1

Technical lookup material for MCTRL4K LED Display Controller User Manual V1.1.1.

MCTRL4K LED Display Controller User Manual-V1.1.1.pdf
Read PDF
VX16s All in One Controller User Manual V1.0.1
www.ledfixlab.com
Controller
PDF Resource

VX16s All in One Controller User Manual V1.0.1

Technical lookup material for VX16s All in One Controller User Manual V1.0.1.

VX16s All-in-One Controller User Manual-V1.0.1.pdf
Read PDF
H Series Video Wall Splicers User Manual V1.4.0
www.ledfixlab.com
Controller
PDF Resource

H Series Video Wall Splicers User Manual V1.4.0

Technical lookup material for H Series Video Wall Splicers User Manual V1.4.0.

H Series Video Wall Splicers User Manual V1.4.0.pdf
Read PDF
Common hub datasheet
www.ledfixlab.com
Controller
PDF Resource

Common hub datasheet

This document provides a customer-friendly reference for common LED display HUB interface pin definitions, including HUB75/HUB75E, HUB08, and HUB12. It explains typical 16-pin IDC connector orientation, common signal names such as RGB data, A/B/C/D/E address lines, CLK, LAT/STB, OE/EN, GND, and the basic wiring functions of each interface type. The guide is intended to help customers identify compatible LED modules, receiving cards, and HUB boards during maintenance, replacement, or project selection. Because HUB pin definitions may vary by module supplier or controller brand, the document also reminds users to confirm the actual module silkscreen, receiving card manual, scan type, and supplier wiring diagram before installation.

common_hub_interface_pin_definitions_en.pdf
Read PDF